obr1en
Member
I have just finished installing a Ctek 250s charger into my 2012 ST.. I have done it via a standard install instead of using the relay option as recommended for smart alternators..
I figured I will remove the green wire that allows the alternator to operate at variable outputs.
My question is for anybody that has installed is when I started and had the car idling the interior roof lights (I had door open) where flicking ever so slightly.. I have taken the ctek power from the positive post on the battery on top of the factory wiring. Could this be the cause of this issue?
Also the Vsc has turned of and I cannot get it to turn back of.
Any help would be great cheers guys
I figured I will remove the green wire that allows the alternator to operate at variable outputs.
My question is for anybody that has installed is when I started and had the car idling the interior roof lights (I had door open) where flicking ever so slightly.. I have taken the ctek power from the positive post on the battery on top of the factory wiring. Could this be the cause of this issue?
Also the Vsc has turned of and I cannot get it to turn back of.
Any help would be great cheers guys