Hey guys please help, I have changed the original engine from my 2006 Pathfinder 2.5 DIesel, I have put a 2006 NIssan Navara 2.5 Diesel engine in now. It has the original Pathfinder engine wiring loom in and connects up ok the the engine almost. The replacement engine has a different throttle body plug connector it is oblong with 6 wires as opposed to the square plug coming off the loom. The wire colours are different on both plugs so I’m at a loss to which ones to connect to get the engine running correctly. The vehicle fires up lovely and idles great but I know this is only happening off the Turbo and the revs won’t go over 3000 rpm. So does any one have any idea what colours from the loom I should connect to the throttle body to engage the throttle body sensor and motor so the pedal and injection works properly…I hope someone has an idea because being in Tassie no auto electrician has a clue and won’t investigate the solution… I’m desperate… please help