STX LED lights into RX

The Navara Forum

Help Support The Navara Forum:

Martin'sD40

Well-known member
Joined
Nov 16, 2009
Messages
148
Reaction score
0
Location
NSW - Hawkesbury River Region
Hi All

Needs some help for you STX owners , I got a set of LED headlights and need some help with the wirering , is there someone with the know how that is able to unplug your Light , I need to know what wire does what , I'm after the 7 pin plug needs to know what powers what and when

I dont mind paying for your time as long as all 7 wires are accounted for eg L/H beam powers etc etc

Cheers Marty
 

Np300cr

Member
Joined
Jun 29, 2016
Messages
8
Reaction score
0
Location
Costa Rica
I was thinking to buy a set of led headlights, but when I was checking the difference between headlights with led and without.. I found that they are using a different electrical connectors. I called to Nissan dealer and they told me that I need to change the electrical harness and it will void the warranty

Sent from my A0001 using Tapatalk
 

Martin'sD40

Well-known member
Joined
Nov 16, 2009
Messages
148
Reaction score
0
Location
NSW - Hawkesbury River Region
If anyone wants to check what voltages etc they have at the LED plug it would be a simple matter of retro fitting and sub harness to make it work.

However no one has bothered to take up my offer

Shame realy

Cheers Marty
 

Np300cr

Member
Joined
Jun 29, 2016
Messages
8
Reaction score
0
Location
Costa Rica
If anyone wants to check what voltages etc they have at the LED plug it would be a simple matter of retro fitting and sub harness to make it work.

However no one has bothered to take up my offer

Shame realy

Cheers Marty
Let check if I can get the voltages from my friend's car
 

Martin'sD40

Well-known member
Joined
Nov 16, 2009
Messages
148
Reaction score
0
Location
NSW - Hawkesbury River Region
If anyone wants to check what voltages etc they have at the LED plug it would be a simple matter of retro fitting and sub harness to make it work.

However no one has bothered to take up my offer

Shame realy

Cheers Marty
As no one could be bothered to do this simple check of whats what , where voltage ect
I Managed to work it out myself - my win your loss

Cheers Marty
 

mike1303

Well-known member
Joined
Sep 1, 2011
Messages
2,280
Reaction score
1
Location
Canberra
Can't figure out why you didn't get a PnP bulb in the first place


Sent via smoke signals
 

Martin'sD40

Well-known member
Joined
Nov 16, 2009
Messages
148
Reaction score
0
Location
NSW - Hawkesbury River Region
Cause I didnt want to just add a aftermarket bulb , I got the RX for work so I didn't need all the other gear that comes with the ST-X, @37k driveway it suited me just fine as I was looking for a good deal , I got a set of STX lights for only a few hundred so why not use em

Marty
 

DesertHucker

Well-known member
Joined
Jul 24, 2015
Messages
168
Reaction score
0
Location
Kalgoorlie
Cause I didnt want to just add a aftermarket bulb , I got the RX for work so I didn't need all the other gear that comes with the ST-X, @37k driveway it suited me just fine as I was looking for a good deal , I got a set of STX lights for only a few hundred so why not use em

Marty
They work without the STX headlight control module?
 

Razer86

New member
Joined
Mar 8, 2017
Messages
1
Reaction score
0
Location
Gladstone, QLD
Sorry for digging up an older thread.

Just wondering if you had any luck with putting the STX headlights in the RX?
 

Johnd

Member
Joined
Mar 31, 2021
Messages
4
Reaction score
0
Got my hand on some original LED headlamps and want to swap out my halogen ones. Can anyone share a wiring diagram on how to make up the harness. Thanks
 

Latest posts

Top