Brendo1234
Member
- Joined
- Aug 20, 2021
- Messages
- 5
- Reaction score
- 2
Hi, new to this forum. Can anyone give me an idiot's guide to installing this, or even better, a video? Thanks
Thanks mate, that actually made it pretty straightforward! Didn't even take that longIf your tub doesn't have any accessories, ie hardlid - the install will be very straight forward.
the bottom four sections of the sport bar have a vertical tab which will sit and be either screwed or bolted thru the top lip of the tub
if you are having any kind of adjustment issue and the bar has the plastic joiners where the direction changes, just loosen the bolt (Allen key?) on the side of the plastic section enough to get some movement.
i guess just get it to where it looks right and double check both sides with a tape measure
run the wire for the brake light towards the rear tail light. you'll find you can tuck it up and have it hidden in the top lip
slice it into the brake wires and you should be right to go
Haha here's the pics,perfect - good to know
i have always used a saying - fits here okay...
Pictures!!! Or It Didnt Happen!
Actually struggling a bit with the break light, it's too short to reach break lights, can't find the wires i need to extend it and plug it in! Any ideas?perfect - good to know
i have always used a saying - fits here okay...
Pictures!!! Or It Didnt Happen!
Any ideas?
is the bar from an NP300?Haha here's the pics, View attachment 35578
Haha here's the pics, View attachment 35578
I would suggest that is the case..
can you follow it back towards the car?
i had this wire for the lid locking and it went out of the tub on the passenger side and up into the floor thru a rubber grommet just in front of the fuel tank.
two wires thru it - one is an earth
have a look under just inline with the passenger front door
Enter your email address to join: