d22 navara nolathane idler arm bush replacment

[RASCAL]

guys thought you all might be intested in this , nolaphane have released a bush kit to suit the idler arms on the d22 . quick and easy to replace and look promising too

nolathane part number - 41123 click on the link below



http://http://www.nolathane.com.au/bulletins/Update%2095-10NO1.pdf

 

[chule]

Have you given these a go Rascal?

 

[albatross]

Iv got them, cost $15 it cost me. Perfect, quick and easy!

 

[Nick-palmer1]

Nice! got a wheel alignment a few months ago and apparently mine has movement in it!
I'll have to add it to the growing list of jobs haha

 

[albatross]

Bursons in launnie had them for 15 bucks on the shelf. Give them a good pre-grease and load as much as you can into all the nooks and crannys before you put them in and then pump more in to pack it all in tight and job done. Had to jack the front end up to find a no-pressure point on the idler arm tho so it was free to play with. Was a 2-can job.

 

[qqc d22]

should be stickyed for easy access to part no.

 

[pointblank5]

There's also these... http://www.whiteline.com.au/product_detail4.php?part_number=W13374

 

[winchester30cal]

I using these nolathane bushes also have been for about a month.