Hey guys I have thoroughly read through most of the threads on the forum to do with coil spacers and shackles. I would like to see if I have finally nutted everything out. I have a 2" lift and want to go higher and decided to take the spacer and shackle root. From my understanding I need to do the following to make it work. These are the shackles and spacers I am looking at.
http://www.performancesuspension.co...-racing-rear-extended-shackles-psrextsh7.html
http://www.performancesuspension.co...acing-front-35mm-strut-spacer-psrnav-004.html
My understanding is that I will need front and rear extended brake lines and aftermarket UCA's. While reading through I found somebody mention that instead of changing the UCA's you can use extended ball joints. I found these.
http://www.performancesuspension.co...ing-front-extended-balljoints-psrnav-002.html
I would like some other opinion's if this will or wont work. I don't need brands of UCA's or anything like that because after a quick search on the forum im sure I can find info on decent brands.
Please let me know if this is everything i will need to get the job done.
thanks
http://www.performancesuspension.co...-racing-rear-extended-shackles-psrextsh7.html
http://www.performancesuspension.co...acing-front-35mm-strut-spacer-psrnav-004.html
My understanding is that I will need front and rear extended brake lines and aftermarket UCA's. While reading through I found somebody mention that instead of changing the UCA's you can use extended ball joints. I found these.
http://www.performancesuspension.co...ing-front-extended-balljoints-psrnav-002.html
I would like some other opinion's if this will or wont work. I don't need brands of UCA's or anything like that because after a quick search on the forum im sure I can find info on decent brands.
Please let me know if this is everything i will need to get the job done.
thanks