It gets used a lot and there are plenty of scratches but I will be selling it later in the year to get something newer, which is why I haven't bothered to finish it.
That said, whatever I get next one of the first things I will do is get it Raptor coated.
Karl
Try clean your MAF sensor or it could be your suction control valve on your fuel pump - both of these (at separate times) caused my vehicle to stall or go into limp mode.
Karl
Just wondering if anyone has made a claim for a bent chassis and had it repaired or did the insurance company write it off?
I have a slight bend in my chassis after hitting a large washout at 40 kph on the weekend and before I contact my insurance company to make a claim but I don't want it...
Took my snorkel off yesterday to do some Raptor coating (see my post elsewhere) and found some damage that was caused by some idiot at the time fitting 11 years ago. We cleaned it up and resealed it.
BTW your photos are how mine has been installed.
Karl.
Here is the damage that we found.
So what do you on a summers day when the temps are in the 40+ degrees Celsius - you Raptor Coat your vehicle of course (or part of it) ;)
The bonnet and roof of my D40 Navara were badly faded and had some rust spots and needed to be repainted; however, I decided to Raptor Coat it instead.
So a...
Hi all - I am after some advice on bashplates. My Brown Davis bash plate is shot after nearly 10 years of use and I need to replace it.
I am currently looking at either ARB, TJM or Ironman and I would like to know:
1. How hard are they to fit yourself?
2. Do they mount into the same...
Hi all, hoping someone can assist - I need to replace the front driver's side speaker that is located in the door and was wonder what size it is.
I have done some searching but can't find an answer, so any assistance would be good (y)
Thanks in advance :)
I found it it 6 x 9 oval speakers...
Hi all, as the title says, I am after an aftermarket secondary fuel filter system to fit to my 2010 Thai built D40 with an auto transmission.
The issue I have is when I go to various sites that sell these they all not 'this kit not suitable for Thai built D40s with the automatic transmission /...
I have that size on my D40 but I have a 40mm lift.
They scrubbed a bit on the front plastic of the wheel arch, so I just cut it off (some was already broken anyway).
Not sure if this helps you or not.
Karl