Hi mates! This is my first post on the site, have been reading for a few days and really liked the site!
Recently I brought a new to me 2008 D22 dx, originally it was fitted with a zd30 but now it has a petrol Chevy 4.3 v6 with an adapter plate to the original transmission using even the stock Nissan flywheel and clutch.
So the problem is when I got the truck the only gauge working was the speedo and battery light, nothing else works because previous owner chopped all the wiring!, What I need to know is what wires (color) goes to: Water temp sender, Oil pressure switch, crank shaft position sensor and camshaft position sensor.
As the ecm is still there and some of the original wire loom still remains I'm going to try and get all the gauges working as close to stock as can be done.
Thanks in advance for your replys and greetings from Venezuela!
Recently I brought a new to me 2008 D22 dx, originally it was fitted with a zd30 but now it has a petrol Chevy 4.3 v6 with an adapter plate to the original transmission using even the stock Nissan flywheel and clutch.
So the problem is when I got the truck the only gauge working was the speedo and battery light, nothing else works because previous owner chopped all the wiring!, What I need to know is what wires (color) goes to: Water temp sender, Oil pressure switch, crank shaft position sensor and camshaft position sensor.
As the ecm is still there and some of the original wire loom still remains I'm going to try and get all the gauges working as close to stock as can be done.
Thanks in advance for your replys and greetings from Venezuela!