Iceman
Member
Well i jacked up the truck today to see how it will look with the 2" suspension and 1" body lift. Have to say it looks awsome! Gives the truck a much more aggressive stance and heaps better clearance. Did a bit of measuring as i would like to get the MT 33s on it too. For the life of me i cant see how a 841mm OD tyre would go on there. With some alterations to the rear guard and liner i think the back of the fronts would just be ok but the front of the fronts (if u see what i mean) are a no way in hell. The flap bit that hangs in front of the wheel would have to go completely and some of the liner and lower bumper as well. Of course removing these and fitting a bull bar would help i guess.
The truck is a 2010 Thai ST AT and currently has 265/70/16 ats on it which are nearly smooth.
Even with a wheel offset closer to the centre of the vehicle i think they would just hit the chassis and/or the sway bar.
Can anyone help here? I have read everything a search throws up but no mention of front end clearance.
Thanks in advance and sorry if this has been covered before.
The truck is a 2010 Thai ST AT and currently has 265/70/16 ats on it which are nearly smooth.
Even with a wheel offset closer to the centre of the vehicle i think they would just hit the chassis and/or the sway bar.
Can anyone help here? I have read everything a search throws up but no mention of front end clearance.
Thanks in advance and sorry if this has been covered before.