Recent content by Bazza2405

Sorry about a 1/4 on the dip stick

Yeah that’s what’s confusing me, on that trip it used about 1/4 ish

Hi everyone, back home and checked and cleaned the pressure valves with come cleaner in the provent and they seem to be working fine. I took out the air cleaner, a little bit dusty but definitely not clogged. Planning on going on another drive this weekend will see how it goes again Any more...

Thanks guys, I’m away from home at the moment but will check these when I get back Thanks

Hi Oldie Nah I didn’t do an oil change before that drive as still had 800 kms before my next oil change. I do 5000km intervals and use my normal total15w40 oil

Yeah sorry I should have mentioned that I am abit chewing through some oil but power is fine

Oh ok, but the thing is it wasn’t over filled oil level had been fine before that and wasn’t blowing out that much oil before?

Hi all, I’ve got a 2004 zd30 with a provent catch can that’s been installed for a while now, but recently I went for a longer drive 200 ish kms and checked the catch can and it had fulled up my whole drain hose and collecting in the bottom of the can. I had seen from an older post here that it...

Sorry it’s a 2004 Zd30, that seems like a better idea to do the cam shaft position sensor. How would I go about that?

Hey guys, I’m looking at putting a kill switch in my d22. Just wondering what I should do ignition, starter or diesel pump? Open to any ideas Thanks

O Yeah seemed strange to me. I think I’ll replace them all, as the others could be shaged too. I’ve only had the Ute for just over a year now so most probably the original ones

Oh aright I’ll have a look at it over the weekend, any reason why the glow plug would cracked?

Ive managed to get it sorted. Took off the nut and the cable and underneath was another nut on that same thread that was very loose. You could literally see the oil seeping between the centre of nut and the thread with the engine off! So I just tightened that up now it’s all good, I will also...

Hi all, I’ve got a 2004 zd30 and I’ve noticed oil on top of the motor. When running you can see a white smoke coming from the same area, I was just wondering if anyone could shed a bit of light on what’s happing here and if anyone knows how to fix it. Any help would be appreciated.