Search results

I got a 3" Cal lift with the beefed up wish bones and all the fruit. Got it at cost through TJM and installed for free, cost me $3000. Honestly its a tough set up but very rigid and I was a bit disapointed by the ride around town and particuarly on the corrugations. If you go for a 3" Cal lift...

Hey Gazza, I went for a 3" Calmini with the extended wish bones and the worx on my D22. I would have to say that they are very rigid and can be a little bit of hard work trying to get the wheel alignment right. If I had the opportunity again I would go for a 2" TJM lift. A lot more common...

Hey all, Seen a couple of UHF Installs posted on the forum, not to be rude but I thought that most look pretty ordinary. After a bit of home work i discovered that TJM supply a (fairly) universall flush face plate that fits in the gap under (or ontop of) the CD player. The brackets and mounts...

I had problems with my Lsd (2006 D22) , changed the viscosity from 90Lsd to a 140 Lsd, this is recomended for hotter climates and as I live in Darwin it definately solved the problem. Worth a try..... Also my advise is steer clear of castrol, does not handle hot conditions at all, these diffs...

I got the suspension upgrade through TJM Darwin, pretty sure it was ordered from the U.S. Carter. Scotty, Ive got a steel bull bar and running TJM shockers. As far as I can see the shocks seem rock tight. Maybe the shock bushes? I didn't check them, maybe worth a look.

The 4 psi rule i had never heard of, looks like a useful bit of info. I have been playing with tyre pressures though quite a bit and the obvious is that the lower the tyre pressure the smoother the ride seems to be, but even when im running under 20psi it still seems to jar more than it should...

Im fixing the back fence, then if theres any time left ill be heading down the road to take the shotty out and get a few geese.

Hey all, I got a 3 inch Calmini lift kit with the extended wish bones in the front of the D22 and also a TJM 3 inch lift in the rear. All seems good except it seems a little rigid in the front end and also the bushes are a bit squeaky. I always keep everything well greased. Every now and then...

140 limited slip oil sounds like its definately worth a go, the LSX 90 always seems a little thin so that might be where the drama is.

Does Nissan recomend a particular brand of oil.

I'm useing castrol rear axle LSX 90. Pretty sure the noise is comming from the diff, we jacked both wheels up and put her in gear (running) and theres no noise at at all but when one wheels down and the other is up the grinding/binding noise comes strait on (only when hot). The vehicle has seen...

Hey Dave, I've talked to a couple of mates today who are mechanics and also a mate who works at TJM who is pretty switched on but they're not real sure why the problem only exists when the diff is hot. I rang a differential specialist and they want to pull it apart and have a look (credit card...