Search results

Excellent advice as always, thank you. Just went out to try method 1 (the slap technique) and it was all working. What's the easiest way to access the wiring connections to give them a wiggle? Cheers, Steve

Hi there, I started my D40 today to find that the little digital display that usually shows the gear, 2/4WD status and ambient temperature is completely blank. Any idea if there's a fuse or wiring loom that supplies this display only? The odometer display to the right is fine. Thanks, Steve

I followed the wiring to a bundle wrapped in gaffer tape. Inside that was a towbar relay. Replaced the fuse holder and have checked that I have power on the perm live pin so that's all good now. I'm using the truck more now that we're out of lockdown, so if 130mA isn't completely abnornal then...

And a long piece of wire I bet! I'll have a look for an unused terminal of some kind then. Presumably the lights would have needed something to plug into. Cheers, Steve

Looking at the state of the fuse holder I imagine it stopped working long before I pulled the fuse, which suggests it's something that I don't use or notice. Maybe the tow bar electrics? Would they have a separate live feed and a 25A fuse? Cheers, Steve

Ah, OK. Would you say that something around 100-130mA is normal for this truck then? Any tips on how to work out what that fuse is supplying? Is it standard, I've not modded in any way and I don't think the previous owner did apart from the Snugtop. Thanks for taking the time to answer, Steve

Hi everyone, I'm new here. I have a 2012 Navara D40 that I'm gradually learning how to tinker with. I'm currently looking at the electrics, having had a couple of issues that might be connected: 1) Glow Plug Relay Fault (P0380) - I've since replaced the relay and all 4 glow plugs and the light...