Search results

Hi All, My D40 YD25 2x4 Autobox has 2 problems namely: 1) P1815 error, i can't seem to find this anywhere in the manual, but the generic code is "MANUAL MODE SWITCH" Does anyone who has a 4x2 auto know what this means and where it is? 2) My OD button is not remaining engaged. if i push the...

Hi All, I have the drawings for the turbo vacuum pipes but i can't seem to figure out something:. 1) Turbo side: From the vacuum pump the pipe goes to a steel manifold that split into 2 pipes then from one pipe it goes to a steel pipe that crosses over the engine, from the other end it then...

Thanks all, I hear what you say re: driving like a maniac, but this ususaaly happens when overtaking, @happy John, Do you have any advice on where to start looking for this fault? Kenny

Hi All, My Navara D40 2.5DC AUTO is giving me grey hairs: The symptoms are as follows... At high revs (4500+) it seems that there is a loss of power, if i accelerate normally say 50% throttle then everything is fine, it changes gears at around 2800RPM If i drive hard from first gear, then it...

OK , it still does it on the neutral. I took it on a 160KM italian tuneup (ride the S#$T out of it) these are the observations: on initial pull off, it engages 1st, on stop and pull off again it pulls off in second, it is engaging 2nd 3rd and fourth so it seems that 1st and overdrive have...

Hi Thanks for the response I had read that but his symptoms were a little different, it seems he is always in limp mode, whereas i only go into limp mode on the down shift do you perhaps know of a way to read gearbox code using elm 327 / anyother method. Sorry i am in Parys a small farming...

Hi All, I have a 2008 D40 Navara, 225K on the clock the other day whilst driving it suddenly didnt have any power. i have a USB ELM327 OBDII scanner and i scaned the D40 but no errors are shown, i only have generic software and can only read normal engine errors, so i cant read any gearbox...