Search results

Nissan Navara Forum

Help Support Nissan Navara Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. TJMNAV

    2005 STR Single Cab Navara - Ready to go anywhere

    ** Please note vehicle is not cleaned in pictures as it wont stop bloody raining ** Hey Guys, Im looking to sell my 2005 D22 Navara STR Cab Chassis Where do I start... ENGINE: 3.0 Turbo Diesel 191 xxx kms... Religiously serviced every 4-5 thousand. Roo systems Chip and Dyno tune 80 Series...
  2. TJMNAV

    Patrol Zd30 in a D22

    Hey guys, Cut a long story short I have a Zd30 with huge amounts of blow by.. I was either going to rip it out and strip it down myself or buy a second hand motor.. I was wondering (because all i need is the bare block) if i could buy a Zd30 from a patrol, swap the turbo and intake (if...
  3. TJMNAV

    D22 SAX 3" springs - 3SDS

    Hey, I have a set of SAX springs to suit a D22 up here for sale. I used to carry some weight and to regain control i bought these springs. I now have bought a trailer and dont require these anymore. They are still under warranty and have done less than 35k. I have recepit for $1500 for these...
  4. TJMNAV

    Aircon wont turn off - D22

    Hey guys posted up before but no one could help.. It seems my aircon will not switch off, it continuously switches on and off. I will leave the switch on and the fan switch off and the AC light is still slightly illuminated. After idling for a while it will idle up and down maybe 100 times in a...
  5. TJMNAV

    Zd30 aircon clutch

    Hey guys, of late my cars aircon will continuously cycle on and off. Even tho the fan is off and the lever is set to outside air, it's still cold as if the air con is on. It will sit there at idle and the clutch will kick in and out repeatedly even tho the fan and switch is off as well...
  6. TJMNAV

    Valving for front shocks

    Hey guys, I blew a TJM XGS Gold shock on the front left, ended up getting two new ones thinking it would handle better. I don't believe they are valved heavily enough, I get a bit of brake dive and about 3 or 4 bounces before returning to resting position. I get alot of body roll when turning...
  7. TJMNAV

    Hit a gutter really hard..

    Hi All I ended up hitting a gutter really hard the other night to the point of smashing the left wheel and bending the steering knuckle etc. Ended up getting new idler arm, drag link, left ball joints and hub etc. I got it all aligned and came up really well, drives true and straight now...
  8. TJMNAV

    Best tyre for lots of tray weight

    Hey all, I have 265/75 Mickey T's 4 ribs on my ute at the moment and seem to get a shit load of side wall roll. I am running them all round at 50 psi but they seem to act like they are sitting on pillow for lack of better terms. I am keen for some ideas for the next set, I dont think I will...
  9. TJMNAV

    HD Springs, air bags or better shocks

    Hey guys, I have a D22 single cab 4x4, I am a carpenter and have all my gear on the back of the ute. I have TJM's heaviest duty springs on the back which are pretty much inverted now and I also have the TJM shocks to suit - just XGS Gold's. I have compressor, fridge and two massive toolboxes...
  10. TJMNAV

    5th gear D22 3.0 Navara - Ratio

    Hey all, Just curious, 79 999km of the 80k I travel a year is unfortunately on the high way at 110kph, the Nav sits on about 3000rpm too which chews the crap outta the fuel.. Not to mention road train over takes take me almost to redline. I am no gear box mechanic but I am curious is there...
  11. TJMNAV

    05 STR 3.0 bit sluggish

    Hey guys, Been reading and watching for ages on here, thought I would finally say hello and ask some advice! I have a 2005 Single Cab Nav with the 3.0 in it - 146k. I have installed a 3", put a Toyota air box (fitted air temp sensor thing back in too), done the EGR and swirl pot mod, catch can...
  12. TJMNAV

    Pulling my hair out over this chip

    Hey guys, I have been reading all over the net for about 4 hours tonight trying to get my hands on a relevant diagram. I have a chip here, new brand they we are looking at testing out and its not looking good so far.. The instruction are shit, as usual. I have 5 wires, red and black for...
Back
Top