Recent content by Sami_b

I found it J ai trouvé https://www.ilcats.ru/nissan/?function=getParts&market=AR&model=D40T&modification=10&group=A&subgroup=130&pid=3191

I have to buy shim valve for my d40 (2006) 2.5 mm and 2.55mm I found the list of all available shims , but i don't know which one to choose http://nissan-europe.epc-data.com/navara/d40m/372-yd25ddti/engine_mechanical/130/13201H/?frame_no=vskcvnd40u0167684

i m looking for the rear weel bearing for my d40 Nissan reference : 40210-EB000 TIMKEN U460L 097 i found only this one : U 497/U 460 L 44,987 x 79,975x 24,000 is it normal that the external part of the bearing (1), can't be removed ?

I m looking for references/dimensions of front and rear shock absorber silent blocks Thx

No fuel is going to the injectors. But today i started it by hitting the rail pressure sensor while trying yo start the engine. I don't know how this sensor works, i don't know if it can order the pump to stop delivering fuel to the injectors.

Hi all My d40 2.5dci refuses to start. Fuel filter is new When trying to start there s no fuel going out from injector. I don't know how to check if the problem is due to the rail fuel pressure sensor or the pressure relief valve I used an odb2, but it doesn't found any error.

Is it possible to clean fuel tank from water and impurities without removing it? Thanks

The actuator for the passenger side is under the airbag,very difficult to put off (big hands) 2 screws 5.5mm

I disassembled all the dashboard including airbag. I can see an actuator on the top and there's also nother on the bottom. I don't know which one is for the passenger side.

I start disassembling dashboard, but i don't know what to do now

It's a dual zone air conditionner

Hi all My Ac right side is always blowing very hot air even if i put it on very cold temp. Driver side is ok. Someone told me that it could be the actuator, but i don't know where is it located.