Recent content by CarlJT

Hi all, Just curious about process to remove the Rh front quarter panel. Have got a big dent and want to repaint. What's the removal process? As alot of what's holding it in seems quite hidden. Thanks

Do you know the length/diameter of push rod for stock, rather make one up a few mm longer before taking it out, may aswell get a new slave cylinder at same time however. Do slave cylinders need bench bleeding or will they bleed easily?

After removing slave cylinder will rod just pull out?

Will give this a go. Thanks

Only changed master cylinder with an aftermarket one

After replacing the injector pump on mine there was a very slight air leak causing fuel to drain into tank over night and same issue. Need to prime bulb and give it a good rev to start and if lucky it would go, I fitted a non return valve and a cheap electric fuel pump right at fuel tank (tried...

Yes I've adjustest master to max distance and has improved. Just wondering if I should extend master fork out further or slave

Slave cylinder or master cylinder? The one at gearbox?

Will try bleed myself see how that goes... Is there typically any issues with bleeding these clutch systems that could cause issues? Is the adjustment inside cab on pedal or in engine bay with master cylinder?

I've had a new clutch installed with new master cylinder I'm having issues changing into first, 4th to 5th and 4th to 3rd. It's been pressure bled, I drove home 500ks and it seemed to improve slightly along the way, I'm just wondering if this is still an issue with being bled or if this is...

12pt 1in deep socket works aswell. Has to be 12pt though 26mm 6pt also works

I don't think it's due to steering style. Have always driven the same style. issue is new driving style same

Swaps? I've got a 3 year old, can't have fun anymore when he's in car

Tyre wear is fine. Alignment has been checked and redone to help with issues. They're pretty new so very little wear. Last pair rear lasted really well even wear. Always had issues with front inside wear however.

Geolander ATs few months old at 33psi