Recent content by ash050

When I purchased the injectors they didn't come with washers for the bottom of the injector orings or return line washers.do yourself a favor and go to a diesel shop and get new ones,so you don't pay the price when they leak like I am now.

G'day Aussie frointer,I'm more so after it to read some parameters.nissan wouldn't really tell much about there findings even though they couldn't find issue.im from Canberra but the car is in Sydney it would be much appreciated to be able to borrow it. G'day old tony,I bought dash command and a...

G'day people,I have a few issues with my D40 and after 2days at nissan they two had no success it's now been towed to my autolecs house(the brother inlaw) I was wondering if anyone in Sydney or Canberra or I between has a consult3 or equivalent diagnostic tool week could borrow or if you could...

G'day,got it towed home,found that one of the injector return line washers was leaking and filled the motor with diesel(pulled 17lts from the sump)it filled up till the point it was sucking it out of the breather into the inlet.surprisingly the motor stayed in one piece.we drains the oil/diesel...

Stuck on the side of the road after my d40 got a slight ticking noise at 100ks I back off then a huge puff of white smoke then the engine went to full revs off the clock 5500rpmfor a bout 3mins with the key off it wouldn't shut down. Cheers Andrew 0410412250

Your right its probably the best option to just replace it.just to get my head around it thou from what you were saying the o2senser is giving the ecu the right fuel trim and the pressure sensers only measure for a difference so if I did put a resister in both it should work in theory or do they...

Yeah was thinking that the o2senser was the brains of the operation and the other two were measuring differentiation of pressure via temp just to clean the filter?ill have to do a bit more research.???idears

I was Gunna try that,as one of the sensors melted when the dpf packed it in.has anyone tryed this.

I just got 4 injectors delivered from Melbourne to act for $1400(supplier on eBay)it took me two hours to fit them.

G'day,if been reading the forum for a while now with lots of things learnt.if had the dreaded d40 auto dpf problem and have just purchased the chip it delete pipe,was wondering if anyone could tell me what resistance the two sensors in the dpf are when at normal operating mode. Cheers andrew