Recent content by 4runna

Cheers mate, The wife and I are heading off around Australia mid April and just doing a few mods beefier we hit the road. Am just over cautious about contaminants from dodgy fuel stations. Cam back from the cape August ‘19 and found dust remnants in my fuel filter and 6mths later my objected...

Cheers mate, Had a look at the lines as to which one it is as they both come from the tank via pump etc. I purchased the Direction Plus fuel manager filter. I’ll check with my mechanic on what affect it might have

Hey guys, I’m installing a fuel manager fuel filter and just want to double check the I choose the correct feed line. Which line is the feed in from the tank? Obviously want to feed this through the pre-filter prior to the factory filter. Appreciate your help

Hi guys, Can I please get an idea on what brand of gauges you all are running. Looking at getting an EGT and engine temp gauge.

I agree and in that case 90% of those that are towing are fighting against the laws of motion

I have looked but can’t find anything like the OBD2 that will work with the ZD30DI. Have you heard of anything like that the people on here are useing. Certainly cheaper than buying gauges and pillar pods etc

What gauges are you running (EGT, Temp) etc out of interest?

Thanks Tony, Will definitely keep those tips at hand. We have a cpl of GoPros, camera (SLR), drone etc and plan to document our trip as we progress through it. Will even fable with some YouTube clips. Wiki camps will definitely be used daily. Just really working on the Ute to ensure it gets us...

Thanks Tony, Mine is the ZD30, I’m getting a Unichip installed along with a boost controller very soon and of course having it run over the dyno for optimum results. Currently I have a snorkel, 3” exhaust and have blocked the EGR c/w swirl mod. We will be towing full time in a couple of months...

Morning guys, Just after some feedback on those that tow a van. I have recently purchased a Parkes13 hybrid van (2100) dry weight and curious on what mods people have done to enable a safe tow. EGT’s etc.. I’m getting mine retuned shortly

Hey guys, I recently did the egr and swirl mod and driving home from work tonight the engine light flicked on and off!!! Would the mod have caused this? Has anyone had any issue at all? I do feel a response difference since I have done the mod though. Any help would be great.

Hey, Im thinking quite seriously on getting one of the 4" stainless snorkles. Powdercoated satin black. It will still be going into the factory air box for the time being. I have it chipped with a 3" exhaust and am also thinking of doing the blocking the EGR as well. Just more curious at the...

Hey guys, Yep another question on the Provent 200!!! I have an '06 ZD30 and have just purchased the can and am trying to find the correct size hose to use. The outlet on the can is 1"od ( 25mm) I have been told to use 15.9mm OD hose and insert it into the outlet of the catchcan and use heat...

BOOGZ STR, I unscrewed the lower part of the dash and dropped it to the floor, then its easy to reach up behind the blanks and push them out. if you have a look at my pic above you'll see the panel im talking about and also have a look at the blank and you'll see the clips you need to press in...

Hi, I have a question.... Dad's giving me hand to make new wiring looms for my spotties and headlights over the weekend, I bought a Narva switch for the spotties but when I pulled out the blank in the dash the I found the switch to be to small. It will fit in other blanks in the dash but not...