Qd32 mods (internal)

[Gota_Dig_Bick]

Hey all, new member here. I have a qd32 in a d21 that i would consider modified. And now im at the next stage of the build and cant really find much info.
Current mods
-300hp 12mm compensated injector pump
- AStreet forward facing plenum
- Hi mount turbo manifold
- td05-16g
- 650nm clutch (slipped at 10psi @ destroyed 2nd/3rd/4th gears), have npc building a 1200nm Twin plate donk atm.
- Front mount IC
- 3.5" V-band dump 50cm long (whole exhaust)

The 16g has run out of flow, so ive slapped a hx35 on there, have bought another td04l-15t also (to compound)
My problem now is im looking at doing some internal mods.
My goal here is to crack or ger as close to 300hp, do some diesel dragging and daily it to work (lol)

Has anyone done/know of different engine combos to increase displacement/strength? Eg - td42 pistons, zd30 rods,BD30 di-d heads? My motor is originally n/a and handling in excess of 35psi quite well on whatever turbo i throw at it (has had multiple)
Any opinions or ideas are welcome.

Thanks lads, pics of the bucket for those keen to see

 

[tweak'e]

i would change over to the QD32T ie the turbo model. its a bit of a different engine to the atmo version and a lot stronger.

 

[Gota_Dig_Bick]

i would change over to the QD32T ie the turbo model. its a bit of a different engine to the atmo version and a lot stronger.

Ah roger. I was under the impression turbo and n/a were the same internally.

I have a spare motor here witch is the one im looking at getting built. Might look into putting turbo internals in it.

 

[tweak'e]

just double check. i'm kinda rusty on it. there was some talk on it especially with zd30 to qd32t conversions.