New front springs
- Thread starter Damgud987
- Start date
Help Support Nissan Navara Forum:
You can get new springs, we got ours from ARB. If you go for too much lift you might have problems with the control arms, our lift was 43mm and that caused no dramas at all.
Scott52
Member
I have the Kings front springs part number KDFR-70EHD. King Springs Coil Springs - Front Pair, KDFR-70EHD
You'll find these springs are a bit longer than standard but the wire diameter of the coils is larger. I have an ARB steel bullbar, 3mm steel bash plates, 9" Kings driving lights, 20" light bar and 3" DRL's all adding extra weight biased to the front springs. After all that, like Old Tony my D40 is 40mm to 45mm higher.
I was having issues with the UCA hitting the strut tower but I fixed that easily with 25mm extended upper ball joints. https://www.the4wdshed.com/extended-upper-ball-joint-nissan-navara-d40-BJ4083V2
Note the extended ball joints are different between Thai and Spanish.
You'll find these springs are a bit longer than standard but the wire diameter of the coils is larger. I have an ARB steel bullbar, 3mm steel bash plates, 9" Kings driving lights, 20" light bar and 3" DRL's all adding extra weight biased to the front springs. After all that, like Old Tony my D40 is 40mm to 45mm higher.
I was having issues with the UCA hitting the strut tower but I fixed that easily with 25mm extended upper ball joints. https://www.the4wdshed.com/extended-upper-ball-joint-nissan-navara-d40-BJ4083V2
Note the extended ball joints are different between Thai and Spanish.
