New Cylinder Head Engine Won't Start

Nissan Navara Forum

Help Support Nissan Navara Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Coil

Member
Joined
Jun 8, 2022
Messages
2
Reaction score
0
Gday everyone, looking for answers, i have put a new cylinder head and new head gasket into a, Nissan Pathfinder R51 Diesel Engine, everything is complete, although when trying to start the engine, it cranks over nicely, but simply won't start, please note, i have attached a photo of a bolt left over but have no idea where it goes, i thought it might be from the EGR system, but all the bolts are present.
 

Attachments

  • IMG_20220607_112613.jpg
    IMG_20220607_112613.jpg
    1.7 MB · Views: 15
The bolt looks like one from the front timing covers , power steering pump or vacuum pump.
Timing all good?
It does take a bit to bleed all the air from the fuel system , crack all the injector lines and keep turning it over while someone pumps the primer till fuel comes out , then do them up.
 
Back
Top