Master cylinder repco part# 2007 d40 spanish

Nissan Navara Forum

Help Support Nissan Navara Forum:

Marked

Member
Joined
Sep 4, 2021
Messages
57
Reaction score
16
Hey guys,

Needing to do the brake master cylinder but repco lists 2 part#'s without definitive differences between the two which might be used to determine if one is better than the other or not ... has anyone come across this who can guide me?

Cheers.
 

BarneyB

NF Supporter
Supporting Member
Joined
Feb 15, 2022
Messages
158
Reaction score
43
Hey guys,

Needing to do the brake master cylinder but repco lists 2 part#'s without definitive differences between the two which might be used to determine if one is better than the other or not ... has anyone come across this who can guide me?

Cheers.

I've been looking at this recently during my brake "upgrade".
It's a bit of a mine field because there is actually about 4 different m/c from 2005 to 2015 depending on engine, build country, transmission etc etc.

Check out Navarapart or Navlife for a better catalogue of the different m/c's.
Some have a level sensor. Some do not. Some have different spacing between the output ports.
Some have a different shaped reservoir.
Gather as much info as you can about your old unit first.
EDIT: Sparesbox have a couple of options too....
 

Horatius

Misanthrope
Joined
Sep 30, 2016
Messages
729
Reaction score
193
Location
Aus
Wouldn't these parts be VIN specific? Usually suppliers will need your VIN to match it to the correct part.
 

Latest posts

Top