Hard lid sealing

[ekka]

Need new seals for front of hard lid, had lid off and not seated properly when lid refitted so seal is badly squashed and leaks. Appears to be 2 seals a bubble type seal and a flat rubber underneath it.
Has anyone found replacement seals? Have been searching but not found any.

 

[Old.Tony]

I'd go to Clark Rubber. They had a large range of rubber seals in stock when I went in there a couple of years back.

 

[MANNING]

Clark Rubber or Bunnings

 

[ekka]

Thanks for the info, I think the 20mm one is the go. Will have to remove lid first to check how it mounts.

 

[Wayno]

Thanks for the info, I think the 20mm one is the go. Will have to remove lid first to check how it mounts.

I tried the D and it didn't seal on it's own, You also need a seal on the lid that folds over the D to stop rain being forced in. I got mine from Clark Rubber self-adhesive with 3m tape

 

[ekka]

Hi Wayno, on my lid there is also a thin flat rubber strip but it seems to fit inside the D seal, could not figure out what it could do. Maybe it has been assembled wrong. Would you have pic of your setup? Thanks.

 

[Wayno]

Hi Wayno, on my lid there is also a thin flat rubber strip but it seems to fit inside the D seal, could not figure out what it could do. Maybe it has been assembled wrong. Would you have pic of your setup? Thanks.

I am away on a mine site until 10th can send a picture when I get home

 

[ekka]

That would be great as we are also away, but holidaying not working.

 

[Cowboy550]

 

[ekka]

Thanks Cowboy, the flat rubber on mine is folded back under lid. Will have to removed lid and fit new one. Thanks for pic.

 

[Cowboy550]

My pleasure ekka hope it helps