Quantcast

Genuine D22 Alloy Bullbar Installation Guide

The Navara Forum

Help Support The Navara Forum:

maltesefalcon

Member
Joined
Mar 2, 2010
Messages
5
Reaction score
0
Hi Guys,

i just got my hands on a secondhand genuine alloy bullbar for my D22.

Fairly straightforward from what i've seen, but just wondering if anyone has any idea where i can get my hands on some installation instructions from??

Cheers

Falcon
 

s14 panda

Well-known member
Joined
Feb 28, 2011
Messages
109
Reaction score
0
Mate! It not rocket science, once you get your standard bumper off it will make perfect scence, any Nissan dealer will give you some install instructions.
 

luke91

Well-known member
Joined
Jan 20, 2012
Messages
194
Reaction score
0
Location
ballarat
Did you get bolts for it? I just took my alloy bullbar off and it can only go on one way. Put one bracket on the bill bar and slide it on and once it's in place put the other bracket on.
 

maltesefalcon

Member
Joined
Mar 2, 2010
Messages
5
Reaction score
0
Gday, i did get bolts, but that was the reason i was looking for fitting instructions, i found instructions for an aftermarket (ironman) bullbar and it had more bolts than i got with mine...pretty sure im right anyway...but just wanted to double check.

Cheers boys...

Falcon
 

Finna87

Member
Joined
May 4, 2013
Messages
16
Reaction score
0
Location
Australia
hey everyone,
just a quick question, my 04 str d22 bullbar moves when i push or pull on it but all the bolts are tight. any ideas as to what it may be
 

mike1303

Well-known member
Joined
Sep 1, 2011
Messages
2,280
Reaction score
0
Location
Canberra
My guess is its not pinned properly check the mounting plates ON the bar not the chassis rails and look for holes with no bolts on them....

More often then not they need to be drilled once the bar has be installed in its resting place
 

amber.2

Well-known member
Joined
Jan 16, 2012
Messages
290
Reaction score
13
Location
Robina Gold Coast QLD
Hi Guys,

i just got my hands on a secondhand genuine alloy bullbar for my D22.

Fairly straightforward from what i've seen, but just wondering if anyone has any idea where i can get my hands on some installation instructions from??

Cheers

Falcon
Mate its a piece of cake, I bolted both brackets onto the chassis, with the grille removed you can easily screw in the bolts by hand over the top of the bull bar , ,i'm sure there is some one on here near you who can point you in the right direction ,[Where do you live?
 

Nini

Member
Joined
Aug 26, 2020
Messages
1
Reaction score
0
has anybody got photos of were to mount brackets for alley bull bar navara d22t 2013 new to this cheers
 

Latest posts

Top