jazzmangay
Member
- Joined
- Sep 3, 2020
- Messages
- 6
- Reaction score
- 0
Check the codes on my 2006 D22 zd30 Navara and was wondering if anyone could tell me what the code is and how to fix it??
Code 02 08??
Code 02 08??
The cabin fan works fine, I have also read that ac can be cut off when in limp mode.Says cooling fan control. I wouldn't have thought it would refer to ac though. Just ac not working or cabin fan too?
Still in limp mode and I drove it for around 15 minutes and the temp gauge was at normal tempLooking at Tweakes post it looks like overheating. Did your temp gauge go high? Has anything changed now that it cooled down or is it still in limp mode
Would the engine come out of limp when the temp returns to normal Tweake? Or would the fault need to be reset first? If it would probably point to faulty sensor if the ECU should drop the limp when temp is not at the alarm level and the aircon checks out.they have different sensors for the temp gauge and ecu.
the ecu temp sensor may be fault (or connection problem).
the other is the aircon circuit. make sure it hasn't blown any fuses.
then test the aircon fan thats on the radiator.
limp mode may be caused by the ecu thinking the engine is over temp (due to faulty sensor) and its trying to cool it down.
i don't think these engines have a limp home mode.Would the engine come out of limp when the temp returns to normal Tweake? Or would the fault need to be reset first? If it would probably point to faulty sensor if the ECU should drop the limp when temp is not at the alarm level and the aircon checks out.
I guess it may keep it in limp if it sees that the back up protection of the AC fan is faulty.
This is interesting, I might have to check and see where the ECU and gauge temps come from on mine
Enter your email address to join: