D22 ZD30 ECU Reset Help

Nissan Navara Forum

Help Support Nissan Navara Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Devjack

Member
Joined
Sep 29, 2021
Messages
14
Reaction score
4
Hey guys, how do I go about resetting my ecu to wide fault codes?
I've left the negative terminal of my battery off over night and when I check for faults after reconnecting, they're all still there and I haven't even stared the car.
 
depends on how you are reading the codes. if your doing it manually then need to jump the pins again to exit.
 
I have an 04 Navara. It has the OBD2 plug, but doesn't use the OBD2 protocol. So a normal, off the shelf OBD2 reader won't work.
For the Consult data, this works for me:
www.buyobd.com
1 x Nisbie Bluetooth Adaptor A3 (ON-A3) = AU$4.90
1 x Nisbie Bluetooth BT3V24BA with 6-pin (ON-BT3V24BA) = AU$39.86

And the software is NDSI for Android. (not the prettiest interface, but it does the job)
play.google.com/store/apps/details?id=com.nissandatascan.ndsi
 
I have an 04 Navara. It has the OBD2 plug, but doesn't use the OBD2 protocol. So a normal, off the shelf OBD2 reader won't work.
For the Consult data, this works for me:
www.buyobd.com
1 x Nisbie Bluetooth Adaptor A3 (ON-A3) = AU$4.90
1 x Nisbie Bluetooth BT3V24BA with 6-pin (ON-BT3V24BA) = AU$39.86

And the software is NDSI for Android. (not the prettiest interface, but it does the job)
play.google.com/store/apps/details?id=com.nissandatascan.ndsi
That's great that they have them again. I got mine from Stahlcar but they don't advertise them now.
A recommended addition to the toolbox 👍
 

Latest posts

Back
Top