C1101 and c1102 fault code on my yd25

[Pierredevilliers]

I have the abs light on 4x4 does not ingage and petrol gauge not working. Took out the tank unit no fault check the speed sensors left and right rear any sugestions from you guys will be appreciated. Fault codes are C1101 and C 1102 and U 1000

 

[[email protected]]

https://static.nhtsa.gov/odi/tsbs/2012/SB-10046601-5796.pdf COPY AND PASTE ON NET

 

[[email protected]]

OBD II fault code U1000 is a manufacturer specific code that is defined by carmaker Nissan as “CAN Communication Line – Signal Malfunction”*, and is set on Nissan applications when the PCM (Powertrain Control Module) detects a break in communication over the CAN bus system for a period of longer than 2 seconds

 

[[email protected]]

https://www.troublecodes.net/nissan... II fault code U1000,of longer than 2 seconds.
copy and paste on google

 

[Pierredevilliers]

Thank you for all the info looks like i hàve a busy day ahead

 

[[email protected]]

always check your fuses, i pull them out , a test light if there is power.no good doing continuity test on them while they connected, had one blown fuse which tested okey but it was earthing out through the globe filament (that particular globe wasnt coming on.