Bull bar lift

Nissan Navara Forum

Help Support Nissan Navara Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Tkeepa

Member
Joined
Sep 5, 2022
Messages
2
Reaction score
0
Location
New Zealand
Hey guys anyone have recommendations on how to get my bull bar a bit more of a lift since I’ve previously just put a 2 inch body lift in ? I’ve been told I have to cut brackets and move down 2 inch and re weld
 
Hey guys anyone have recommendations on how to get my bull bar a bit more of a lift since I’ve previously just put a 2 inch body lift in ? I’ve been told I have to cut brackets and move down 2 inch and re weld
That's the one mate
will be similar with rear bar, tow bar
side steps and/or anything else bolted to the vehicles chassis
 
Hey guys anyone have recommendations on how to get my bull bar a bit more of a lift since I’ve previously just put a 2 inch body lift in ? I’ve been told I have to cut brackets and move down 2 inch and re weld
depends on the vehicle. if its an airbag bull bar then you run a risk of it failing WOF. body lift requires cert, so you might a well talk to the cert engineer about it.
if its off road only then cut and reweld.
 
yep just re-drilled new holes in mine.
rear tjm bar was quite a bit of cutting and welding.
 

Latest posts

Back
Top