Search results

4wd systems have their Lokka on sale for $368 delivered!!! http://www.4wdsystems.com.au/index.php?id=121

Mate I was there a couple of months ago and I got a massive buzz by actually going to the lake and having a swim, there was just something weird about being among ocean wildlife in the middle of Australia. The sunset and sunrises are one of the best I've seen too. It's only approx 45mins from...

RS999188 - Front RS999116 - Rear Are the part numbers for a 3" lift D22

As I stated earlier fitting UCA's allows you to fit bigger bore shocks as the clearance is much larger! If you don't fit the UCA's which many haven't, you have to grind a small section out of the factory UCA's.

I have only had my kit on for a short while so I can't comment on longevity of the CV's with a 3'' lift.... There are guys on here that have had 3'' for a while and I haven't heard anything negative from them.... Not saying there isn't as they might not be speaking up. Yes the 3'' lift is in...

Extended shackles are illegal..... I had EFS shocks previous and they hit the factory upper control arms as well. Yes you can just go 2" lift with UCA's, all they do is allow for longer down travel, make it easier to get the front end into alignment spec and allow you to go up a further inch if...

And what Gonzo said.... very nice boat!!

Nice rig Redman, what size tyres have you got in that pic?

Thanks for that exactly what I was after! legend

Hey Tommy, Who's King? Just to confirm it's definitely +20 offset? Did you have to do much work on the guards after you fit them? Cheers Adam

Hey Pete, Nice, would be good to see your pics... I just grabbed some oil return hose from the local hardware, it doesn't need to be anything special as it's not under pressure and only has a small amount of oil going through it. I used these reducers below, slid them straight on to the...

Just thought I'd put up an alternate place to install a Provent 200 on a 2009 2.5 CRD. All up it cost me $175 for the catch can and $55 in hoses, clamps, reducers & an off cut of aluminium. (1hr all up to fit) I ran the hoses over the intake hose and next to the radiator to come out the front...

What Aido said in regards to torsion bars. I have just replaced my shocks and 3 of the 4 factory ones were screwed!! 70,000k's old.... And I've heard of a lot of other people with the same experience. So in saying that you'll probably notice a big difference if yours are screwed as well. John...

Sorry I should have specified- I was talking about suspension lift blocks not body lift blocks.

Have done a search but can't find anything on lift blocks. What's every ones views and experiences with lift blocks? I'm pulling a leaf out as I only got 30mm lift out of my EFS springs and it's an extremely harsh ride, so Zordo has reccommended to pull a leaf out. I'm assuming this will...

I don't want to put anyone of this kit as there has been so many good reports to my one bad report. Like you say Rusty I had heard nothing but good reports hence why I went with them, I spoke to Zordo as well and he suggested I could remove one of the springs and see how that goes. I might do...

Bosted and Joe is yours EFS? Ridgie I run 36 psi and am pretty keen at keeping them at that because it seems to wearing the tread perfectly. I'm a paramedic and we have some shit trucks with horrible suspension so I'm very used to having crap suspension. And I also have had utes and SUV's all...

I recently put a 2" lift in my 09 D22 with EFS springs and shocks, I did this after searching the forum and seeing nothing but good reviews. I live in NW QLD and the roads are dodgy out here so I went comfort springs. Went for my first drive last week to Mt Isa which is 120k's away, holy shit...

Cruise Control Just thought I would let you all know I've just fitted a E-Cruise cruise control to my 09 2.5CRD. It's a fly by wire unit and only takes 45mins to fit with no calibration needed. $588 with a column stalk or $688 with RF switch which is what I got as you can mount it anywhere (no...

Don't mean to hi-jack a thread but I noticed this thread last week after trying to source a set for myself. I then spoke to docp1980 who said his are on back order for an unknown amount of time... I've posted a thread under parts & accessories for sale, if we get 10 people I can get a set of an...