Search results

actually you are right, today I test to revs up in 2nd, 3rd gear and happen the same, it don't go over 4000rpms. I did a MAF cleanup with a circuit cleaner but still the same, I will resarch on how to test the MAF, not sure if possible. I have 275/65/18 tyres, but I don't want to get 5000rpm...

I did the NPS test and same results. Looks like the ECU (or something else) when reads Turbo boost over the standard reduce the RPM to protect the turbo/engine. My mechanic reduced the turbo boost presure and RPMs goes over 5000RPM if he increases the turbo pressure RPM don't reach 4000RPM. So...

I didn't tried to drive with NPS disconnected but some time ago I removed and test it with a multimeter and was working fine, the CC is also working fine. Obviously has higher the gear the lower the revs, the weird thing is that if I accelerate progressively sometimes I reach 4000rpms but I...

Hi guys, I'm really frustrated with this situation. My truck is under review since January with an specialist and he can't find the issue. The situation is that in 3rd, 4th, 5th and 6th gear when you push the accelerator to the bottom revs doesn't go over 3800 rpms, some times I get 4000 rpms...

thanks for your reply, before going to the mechanic I cleaned up the MAF sensor and change air filter. I have the feeling to that it is related to the air intake but the mechanic told me that boost sensor is getting good values, this sensor is at the air intake manifold end, after the...

Hi all, the past week I leave my NP300 2019 2.3 Biturbo manual in the mechanic because I'm having an issue, for some reason when I push the acelerator to the bottom revs in 3rd, 4th or 5th doesn't go over 3500RPM. today the mechanic told me that there is a kind of overpresure in the turbo, if...

Anyone? I'm trying to understand which is the max rpm in 3rd, 4th and 5th gear

Well, finally I got a solution! My D23 as many others D23 had the hot pipe leaking issue, so I went to an turbo specialist and he replaced the orings for others thicker to avoid leaking. This finally solve the leaking issue but also increased the turbo pressure, looks like when the ECU detects...

I hope someone can put me in the right path, since a month ago I'm having several problems with my Nissan Navara np300 D23, it has 48000km, manual transmission. I'll try to summarize the issues I'm having in the order they appeared: 1) After driving for about 30 minutes or so it is hard to push...

I checked the clutch switch works fine and also check that it get in got with the clutch pedal, so it should be working fine. Something weird that happened yesterday (after checking all switches) is that the brake pedal got hard to push while driving, I had to turn off the engine, push the...

yeap, I drove in the highway around 80kph. I tried in 4, 5 and 6 gear

Thank you very much for the explanation, as you said I'm learning how things works trying to identify and test each of the involved components. Well, today I disconnected the NPS switch (not the plunger) and tested the CC SET but didn't work and didn't get any error either. Basically I tested...

I didn't test the CC with the NPS unplugged but I did remove the NPS switch and test it with a multimeter and worked fine. Today I tested also the clutch and brake switched, they both worked fine. Tomorrow I'll unplug the the NPS connector without removing the switch (should be the same) and...

Hi guys, I have a Nissan Navada D23 (biturbo) and I would like to know if anyone of you have ever tested the max rpms that you can reach on each gear? Recently I noted doing some sand off roading that my RPMs automatically drops on 3rd gear when reaching 3700rpm or so, I remember some time ago I...

Today I tested the clutch and brake switches and they both works fine. I'll try to disconnect the NPS switch and test the CC SET one more time. I'm running out of options

Well I test the sensor and looks like it is working fine, I also did the hack but didn't worked so I guess the CC errors comes from another place. Any idea what else can I check?

I guess it's the one marked in red, right?

Is the one in the left isn't it?

Thank you very much! My Nissan Navara is manual so I'll check the NPS. I'll let you know. Thanks again for your help

Hi guys, after a hot afternoon of doing some off road in the beach my cruise control stopped working. I can active with the ON/OFF button but I cannot set a desired speed (set button) I read some that might be related to selenoids so I cleaned them up but the issue persist. Any idea?