Search results

I found something. After a long search i found out that M43 Plug draws 2.5 mA while power is off. I have tried to find out what that plug is for but have no idea. It is a 12 pin plug connected to the body controll unit (Black box under the steering wheel)

It has been some time since i tried to do any further investigation on the Nav. But since the cold weather is rolling in and the glow plugs really come in handy in the mornings I have to drop down the hammer and pick up the wrench so to speak. I noticed that before I start the car, when i put...

It has cruise control, but it looks orginal. It had a lot of extra work lights in the back and some pretty sketchy wiring for a new head unit and subwoofer. I removed all the wiring for the non existan work lights and touched up the bad wiring, but ill keep digging in that general area and see...

Good to know. It's weird that the engine stalls as soon as i press either pedal after starting. This only happens when glow plugs are on

Could it be the CV joint or wheel bearing

So i was looking at the wiring diagram and found this swich. It says that when pedals are released there should be battery voltage to the ECM. Im no electrician and i dont know how the ecm works but could it be that if there is a short there the car wont start

I have bought a new fusable link (from ebay) and replaced it, it was supposed to be oem part but turns out that some of the fuses are larger amp rating but im not too concerned about that. I took out the dash board and checked the earts befind it, also checked the ones in the engine bays. I get...

So i discovered something interesting. I decided to try and jump start the car and do some measurements at the same time, turns out when i get 14v instead of 12v everything works as it shold. glow light tuns on when ignition is on and the car starts no problem. Im wondering if the glow releay...

Does anyone know if there is some software that allows you to connect to the ECM and reprogram it/ mess it up?

Yes there is a switch on the pedal, In cold start mode it brings the revs up to 1400 rpm and when you press the clutch it brings it back to normal Yes there is a switch on the pedal, In cold start mode it brings the revs up to 1400 rpm and when you press the clutch it brings it back to normal

The cable from the original battery to the starter is dissconnected and the "new" battery is only supplying power to the starter. starter is brand new. Im going to look into the grounding issue you mentioned and hopefully I will find something, otherwise the harness is coming out :cry:

Hello, I recently bought a nissan navara with some issues. The car has shifted owners because no one has been able to figure out exactly what the problem is. The car wont start in its orginal state so the previous owner has installed a secondary battery and connected it to the starter, now it...