Search results

There is also the small oil cooler at the front. If a hose come loose, cracks, or the oil cooler itself becomes damaged this can cause the oil to shoot out at high pressure. But the cooler is infront of the condenser. I doubt the crank pully would fail that abruptly to cause leak that much. You...

Mine takes about 21 seconds to get to 100km/h. This is a bit slow, perhaps because of its age as mine has over 300,000km on it. Perhaps someone with less worn out engine can chime in. Also, there is a common cause of low power in 3rd and 4th gear. This is caused by a bad NPS (neutral position...

Hey all, just thought that I would post an update: So it seems that the problem was that the turbo was leaking, kind of badly. When I took off the rubber intake hose, there was a pool of oil just in front of the compressor wheel. I opted to replace the CHRA, or the turbo core, instead of the...

Hey everyone. So my D22 Navara ZD30 uses a lot of oil. There are no visible oil leaks, no drops of oil on the ground. Only thing is, there is a lot of oil around the intake pipes, manifold, turbo and even on the EGR pipe. I do have a catch can fitted (a cheap one) but the amount I'm seeing is...

G'day everyone. As the thread title reads, can the D21 Upper Control Arms fit on a D22? My reason for asking is that I lifted the truck with longer shackles and tightened the torsion bars. Lifted the truck by 2 inches. But now it's nearly riding on the bump stops, and I know that the D21 has a...

I'm from Trinidad and nope, I have no Black solenoid. I got a used green one from a scrapped engine in a used parts place. It's working again! Thanks for the replies guys! 😁

Engine mounts are good, I think it's the electric solenoid itself. I disconnected the brown switch to the swirl valve since I had the EGR blocked. I then reconnected it and put it in gear and the valve closed. So that means that the system is getting vacuum and brown solenoid works. I then put...

Good day to everyone! So recently whenever I shut the motor off (ZD30) I get a lot of engine shake. Before it only happen every now and then but now it does it all the time. I think it's most likely the butterfly valve on the intake that isn't closing anymore. So my question is, do I need to...

Okay, thanks a lot guys, will try your suggestions and get back to you.

Hi, I have a problem with my Nav ZD30. The engine RPM stated to fluctuate, like increase and decrease really quickly without me touching the accelerator pedal. It doesn't happen often and seems to happen at random times. It has a new fuel filter and none of the lines are choked. Any ideas? Thanks!

Okay, thanks a lot for the advice! I read the egr/swirl super thread and saw some people just unplugged the brown switch to leave the swirl valve open, I think I might do that. Thanks again for the help!

Hi, thanks for the reply! I live in Trinidad and there are no emissions laws at all. Here are some other pics from above.

Hello! This is my first post on here and was hoping someone could help. I want to do the egr and swirl mod on my 2004 Navara D22. I've looked on this forum and gained a wealth of information, except my Navara is a bit different from everyone else's. Mine doesn't have the black switch, only red...