Search results

Nissan Navara Forum

Help Support Nissan Navara Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Rabbid-chop

    Disable TC and Torsen diff

    Not necessarily Navara related, but thinking this year I might get a new work ute, in 2wd this time. But would like to disable the electronic nannies and put an LSD in, and possibly suspension work (if not lower, then heavier springs and better shocks) although there seems to be absolutely no...
  2. Rabbid-chop

    Clunk noise steering

    Makes a clunk when driving along and turning a corner. Eg going through a round about, will clunk left and then clunk right kinda midway through steering travel. Just had it at the mechanic - he reckons he can hear it and feel it but couldn't find the problem (probably because he's too busy to...
  3. Rabbid-chop

    One man gearbox removal/installation Hall of Fame.

    Who's done it? How hard? Any tips? From what I understand it's quite an achievement so stand up and be counted!
  4. Rabbid-chop

    zd30 Belt Noise

    Noisey belt after getting local orangutangs to do some work to car. Any one have tensioner pivot torque specs or other advice or tips? New belt and tensioner quite cheap on ebay...
  5. Rabbid-chop

    2wd sway bar?

    Would 2wd sway bar fit on 4wd d22? After driving a 4wd dmax for a couple weeks, was impressed with its car like handling - it had a heavy front sway bar. Never really bothered me till i got the d22 back - it really wallows in corners. Im thinking if it fits will just unbolt one side for off...
  6. Rabbid-chop

    Oh Crap

    Is this internal or external damage? Finally found the bolt i dropped about a month ago too. It was getting ground between the pulley and the tensioner until i managed to pop it loose but was missing until now. Its been a bullet proof rig untill now. I'm pretty much screwed now, its going to...
  7. Rabbid-chop

    2.5" Redback Exhaust D22 3L. VIC. S/E Melb

    FOR SALE 2.5" Redback Exhaust D22 3L. VIC. S/E Melb Redback 2.5" cat-back as fitted by Midas about 8 years ago. Straight through muffler. Aluminised steel. Has chrome tip. Jig made dump pipe with high flow cat from local exhaust shop, probably about 4 years ago. Has an m8 egt hole, can be...
  8. Rabbid-chop

    AFR gauge that goes above 20:1

    Just wondering who's running a wideband or other afr gauge and if it goes above 20:1? Everything on the market seems to top out at 20 which is a little bit useless as i imagine most diesels spend most of their life above that. Cheers.
  9. Rabbid-chop

    Help! Bolt stuck between main pulley..

    and idler arm. After spending a week installing a new turbo, it was time to start it up and idle up to temp. Sounded great except for a funny squeak which at first thought was just steel tray or something till i noticed some sparks from down in the belt arrangemet. Long story short, its what...
  10. Rabbid-chop

    Public Apology.

    Want to apologise my the ugly behaviour recently. Im not proud of itand usually don't let things get to me or at least have more control. I started it, but got a bit heated when threatened with having my personal info hacked and somehow used against me. In hind sight it was probably just...
  11. Rabbid-chop

    ZD30 Turbo Upgrade

    Namely BorgWarner EFR6258. After using one (8374) on my other car I'm convinced these things are the silver bullet. Turbine and shaft weigh half as much as conventional stuff so you can have a bigger turbo spooling up earlier. Not to mention oversize bearing assembly, speed sensor option, built...
  12. Rabbid-chop

    Why no Haynes Manual? :(

    Looks like they went straight from d21 to d40. http://haynes.com.au/category225_1.htm Would make life a lot easier, trying to navigate the workshop manual PDF from under the car covered in grease just doesn't cut it.
  13. Rabbid-chop

    ZD30 lift pump set ups. Post 'em up!

    I'm half and half about setting one up on mine, I'm interested to see what set-ups people are running and your thoughts and experiences.
  14. Rabbid-chop

    Spring choice. Varying loads.

    Hi, sorry for adding another one of these spring questions to the mountain - My leaf springs are a bit tired and droopy, wondering what would be a good choice for a single cab steel tray that from day to day can go from empty tray, to light loads to over capacity, but for the most part maybe...
  15. Rabbid-chop

    New Navara Launch this weekend.

    I cant divulge too much info, but completely new generation Navara is being launched this weekend. The biggest talking point im guessing is going to be the twin turbo 2.3 engine.
  16. Rabbid-chop

    Turbo diesel to replace the V8 Utes?

    Just saw this, how awesome would it be if this happens? Id imagine there would be some very tasty aftermarket bits and pieces for light commercials if it floats. http://ausrotary.com/viewtopic.php?f=61&t=244452
  17. Rabbid-chop

    Checking for Updates in Threads I've Posted in?

    As above just wondering if there's a way of checking for updates with out searching and scrolling through pages and pages of new posts?
Back
Top