Search results

The Navara Forum

Help Support The Navara Forum:

  1. B

    Cooling/Radiator to ally/ do you do the Water pump too? Whist ya there as they say!

    Yup, got me tossed! Valve clearances? Rings/compression?
  2. B

    Strange Engine light issue

    Mine did that before the pump finally went.. every now again the light would come on, pull over, cycle the key on/off two three times and it would go off...
  3. B

    Cooling/Radiator to ally/ do you do the Water pump too? Whist ya there as they say!

    Run in lol i wish! Mines shocking on fuel, I'd be lucky to get 450 to 500ks per tank..
  4. B

    Cooling/Radiator to ally/ do you do the Water pump too? Whist ya there as they say!

    Runs well, so far! Took it for a quick run up the freeway and she is definantly running cooler- going by the dash temp gauge.. It once would sit about 1/3 on the gauge and now she's sitting on 1/4... FINGERS CROSSED!
  5. B

    EGR Valve removal questions

    Done mum! 3mm alloy should hold, there's no weight in that sensor and heater pipe... here's hoping!
  6. B

    EGR Valve removal questions

    ZD 30 baby ;) lol yeah... yup, got two catch cans ! So all good there. They're a swine of a thing the EGR set up, they make the diesels eat thier own poo so to speak, and those pipes always crack, scares the shite out of you when they blow out... got me good, I was on the gas too, and then...
  7. B

    Cooling/Radiator to ally/ do you do the Water pump too? Whist ya there as they say!

    Oooooo nothing worse than "The Wait" !.... j.k, she'll be fine! Be interesting to see if the new head gives you better economy...
  8. B

    Few questions regarding 2009 Nissan D22

    Howdy, park the unit up hill and use the bottle burp method! Make sure the heater is turned on in the cab.. You can't really, if in doubt, replace it! It's all plug and play now days, look on line for the conector wire kits, most well known brands have these wiring kits for thier head...
  9. B

    Can’t turn over crank to set timing

    Oh cool... good to know you have a good tool box eh what possessed you to leaver on the cams, Mannn.. ;) Hmm, I can't see it bloke, that chain would have to be hanging there, BUT, it may have from turning it in reverse as the chain would slacken.. Doubtful, but maybe! What do your sprockets...
  10. B

    Can’t turn over crank to set timing

    DO NOT Turn A Motor Over By the cams ! MAN ;) you're lucky you didn't snap a cam! A little bit of wee came out when I read that ;) Down load the manual off here and READ READ READ ... It's all there my man and it's alllll step by step.. Go buy the right size socket for the harmonic...
  11. B

    Cooling/Radiator to ally/ do you do the Water pump too? Whist ya there as they say!

    It's a shity job.... soooooo whilst the radiator is out.... You need some small ring spanners to get too a few of the studs.... r/r, belt pully/tensioner and cover plate, the only way to get to the lower studs..
  12. B

    Cooling/Radiator to ally/ do you do the Water pump too? Whist ya there as they say!

    Yeah I would too Tony! What water pump did you use, Nissan, OEM or Aftermarket? Bit the bullet and did mine too... seemed silly not too! Got the new tank in, not very impressed with it, the damaged fins! Bad! Real bad, but I had to fit it.. I'll still send the pics to the supplier and...
  13. B

    Cooling/Radiator to ally/ do you do the Water pump too? Whist ya there as they say!

    Never really back flushed it but it has been changed on services... yeah the original ones are VERY good, looks brand new on the inside.. I couldn't get an original one so I had to go the Gates one.. I'm thinking of heading over to W.A so I thought why not... yup, I changed it! Whilst I'm...
  14. B

    Can’t turn over crank to set timing

    No probs, just use a paint pen from chain to sprocket, use different colours for each sprocket... curious to see what it is eh Are any of the rockers/tappets realy lose? If it has a bent valve and it's hitting the piston the valve will be open.. turn back and forth as much as you can and see...
  15. B

    Cooling/Radiator to ally/ do you do the Water pump too? Whist ya there as they say!

    It looks ugly but it worked! To add the powder to the underneath I put a pile of the powder on a rag then slid the rag under the fitting and blew it into place.. yes, I gave my radiator a ;)
  16. B

    Cooling/Radiator to ally/ do you do the Water pump too? Whist ya there as they say!

    With the good luck comes the bad eh.. over tightened once to often.. I think this is the 4th time the radiator has been out .. Looks like a job for the drill and a "nutsert" ..
  17. B

    Cooling/Radiator to ally/ do you do the Water pump too? Whist ya there as they say!

    Luky find, this little shite of a 10mm came from the new bonnet scoop... dropped it during fit up and couldn't find the swine of a thing! Used cams the lot too! It was wedged there too, it came out with the radiator...
  18. B

    Cooling/Radiator to ally/ do you do the Water pump too? Whist ya there as they say!

    Howdy all, hope you had a great Easter break! I had a slow tip back from N.S.W months ago with heating/boiling issues on the zd30, what I hope to be the problem was a cracked overflow pipe that comes from the radiator, the pissy little plastic bit! What I'm thinking is that I've leant on it...
  19. B

    Can’t turn over crank to set timing

    Oohhhhhh..... right, it could be a valve?.... ok, Mark chain and timing gear with paint pen or tie off with small cable ties and remove ! I've got a little to do on mine atm so I can't move... but you don't need me, your doing fine so far!
Top