Hey all,
Sorry if this has been covered before.
I'm stuck on a wierd one, 2016 NP300 had 1 failed boost solenoid (confirmed by logging boost pressure on dyno, and then switched solenoids around and retested)
Replaced both solenoids, still only reading boost only up to 22psi.
Any ideas ?
Sorry if this has been covered before.
I'm stuck on a wierd one, 2016 NP300 had 1 failed boost solenoid (confirmed by logging boost pressure on dyno, and then switched solenoids around and retested)
Replaced both solenoids, still only reading boost only up to 22psi.
Any ideas ?
Last edited:
