Recent content by Wayno

Nissan Navara Forum

Help Support Nissan Navara Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. W

    Kut Snake Flares

    Have a full set front and rear Kut Snake flares, bought to install on my 2010 D40 sadly it died before i got around to fitting them. they are in Perth WA If anyone is interested make an offer to take them of my hands. Also have a new pair of mirrors with indicators to also fit the D40 make an...
  2. W

    Navara overheating under load after bullbar fitting

    tony your onto it, replaced my radiator and it was the viscous hub was stuffed, fitted a new hub and no issue,s also thai build 2010. Did this only 2 months ago.
  3. W

    replace intercooler

    Yes i had to unplug it to remove the intercooler. Mine is Thai build
  4. W

    replace intercooler

    Interesting because my yd25 thai build 2010 has it on the bottom of intercooler drivers side
  5. W

    Boost gauge at idle

    Cheers
  6. W

    CCT Turbos

    Got the stage 1 running now 18 months no issue either.
  7. W

    Boost gauge at idle

    Hey Tony, I am looking at also installing a boost gauge. My intercooler pipes are replaced with polished aluminium and the output side pipe has a small pipe coming off it and it's capped, is that where I can connect my boost gauge pipe to it looks the right size same as all the other vac pipes...
  8. W

    Led bulbs

    Try superior vision Australia 1300495745
  9. W

    D40 not starting

    Hi Tony, curious on the radiator, What recommendations for a better radiator do you have ? Any particular brand or make for Thai D40 2010. Cheers
  10. W

    Aftermarket Secondary Fuel Filter For A 2010 Thai Built D40 Automatic

    Looks like a catch can not a fuel filter ?
  11. W

    Navara acceleration problem

    Overfueling ?
  12. W

    Electrical Issues

    Not on my Navara but had crazy shit happing on my VE, turned out had the alternator changed and the earth wire was not connected tightly, tightened it all my electrical issues went away. Suggest checking earth connections maybe
  13. W

    Fitting Bonnet Protector

    Did you get the little screws and the plastic clip things ? Line up the protector, remove the existing plugs that line up, slip protector under the rubber use the new screws and clip things into the location of the originals you removed. Fiddly bloody job above is for aftermarket but I would...
Back
Top