Recent content by Danny-DO

Hi, I just installed a Dandy Exhaust/DEA 3" on a 2006 D22 ZD30 and it all went OK. Mine is with muffler but no cat... Three thigs I did not like on mine: 1. No EGT thing on it. I took mine to a local exhaust shop and paid 33 $ to get one welded. If you want one make sure you do it before...

Nice... I went with a cheap one form Autotecnica, the double analogue for boost and EGT. It came with everything but I decided to go and buy a brass T and use the SaaS silicone 5mm (or 6) hose I used to replace all my vacuum lines for the tubing. These dials are fully digital. They have a...

Forgot to add that these are my instructions.

Hi all, Yeah... 🙄 Sooo.... I purchased a cheaper Boost Gauge with shit installation instructions and I cannot find any instructions online besides the "install the vacuum gauge in any vacuum hose after the intake".Well great...Not a mechanical engineer and also first time owning a diesel so I...

When I move the steering wheel the column moves with it but there is not movement beyond the steering box. I'll have to have a look at this adjustment nut. Are these things prone to fail? I personally did not hear of a lot of issues around these parts...

Hi everyone, Got quite a bit of steering play with my 2006 D22. Took it to the service and they say it is within limits but it is way more than the accepted 35mm so I am looking to replace the steering box. It is enough play to make the car slowly and lightly veer left to right so I definitely...

Hey richNAV, Get a dyno done (its cheap) to see if you have any issue internally, with the intake or with the Turbo. Mine found that the boost was a bit low and discovered a very small leak. Got sorted... EGR Block and Catch Can for engine safety and disable the "swirl valve" for a bit more...

Hmmm.... having a look around the engine yesterday I found that the vacuum hose was completely broken and none of the valves were working properly. That also solved the shaking at engine stop... Given that the "swirl valve" mod was done, would that affect the boost? It was definitely broken at...

Hi Everyone, New owner of a 2006 D22 with a ZD30 in it and 230k done. It has all the critical mods like EGR block, Swirl Valve and Catch Can but nothing else that I can find. I wanted to see if the engine is in a relative healthy state keeping in mind the fact that it is 230k and 2006 so I...